40
Error Codes
Error
code
Description
Things to check
Solution
Overloaded
Laundry
Check if the laundry is overloaded?
Decrease the amount of
laundry according to the
instructions on page 18.
Water is not
supplied
Is the tap open?
Check the tap, water
supply inlet
fi
lter, water
pipes, and water supply
hose.
Has dirt collected in the water supply inlet
fi
lter?
Is the water pipes or water supply hose
frozen?
Has the water supply been disrupted?
Water does not
drain
Is the drain hose blocked?
Check the drain hose and
the drain outlet.
Is the drain hose twisted, crushed, or frozen?
Is the drain hose connected correctly?
Is the drain outlet too high?
The tub does not
spin
Is the lid open?
Close the lid.
Is the laundry all on one side of the tub?
Add a few more items to
wash. (If there is only one
item in the tub, it is likely to
become unbalanced.)
Does the laundry include too many thick
items like cotton blankets or jeans or too
many large items like sheets?
Is the washing machine wobbling, or is the
fl
oor under the washing machine slanted?
Are there any unwashable things in the tub?
→
Page 12: Preparation of the laundry
(sorting the laundry)
The lid cannot be
locked
Is the lid closed?
Check that the lid is
completely closed. Check
that there are no foreign
objects in the lock switch.
Are there any foreign objects in the lock
switch?
The lid lock
cannot be
released
Are there any foreign objects in the lock
switch?
Turn the power o
ff
and
then on again and wait a
little while. If the lid is still
locked, contact a service
center for repair.
The spinning
speed does
not reach the
speci
fi
ed value.
Check if there is too much detergent?
Check the amount of
powder detergent used.
Check the drain hose and
its installation.
Check if the drain hose is clogged?
Check if the drain hose is installed correctly?
n
If warning sign such as “F0”, “F9”…etc. are shown in the display, stop operating the washer immediately
and contact an authorized service dealer or a service agent for further inspection and/or repairing.