26
How to Install the Washing Machine
Connecting the
water supply
hose
Connecting the
drain hose
●
Main unit
Screw the union nut to arrow direction to
fi
rmly attach the water supply
opening.
Precautions
Make sure that the union nut between water supply hose and
main unit is tightly screwed.
●
Water leakage may occur if union nut is loosened.
●
Water leakage may occur if union nut is loosened.
●
Unscrew the union nut when dismantling.
Cold water inlet valve
Angled union nut end of
water supply hose
●
Connect the drain hose to drain outlet and clamp tightly by the hose
clamp.
●
Hook the U-shape end of the drain hose over the rim of a sink to drain.
(Note)
●
Never lay down the drain hose, as water will be discharged.
●
The discharge height should be approx. 1 m above the base of the
washer.
●
Be sure the drain hose is properly routed so it will not kink or lift from
the sink.
Drain hose
Hose clamp
Summary of Contents for SF-P90XA
Page 31: ...31 Memo ...
Page 32: ...3WPL115531 ...