background image

SJ300 Inverter Specifications

Other user-settable parameters

V/F free-setting (up to 7 points), frequency upper/lower limit, frequency jump, accel/
decel curve selection, manual torque boost value and frequency adjustment, analog 
meter tuning, start frequency, carrier frequency, electronic thermal protection level, 
external frequency output zero/span reference, external frequency input bias start/end, 
analog input selection, retry after trip, restart after instantaneous power failure, various 
signal outputs, reduced voltage start, overload restriction, default value setting (US, 
Europe, Japan), deceleration and stop after power failure, AVR function, fuzzy accel/
decel, auto-tuning (on-line/off-line), high-torque multi-operation, automatic energy-
saving operation

Carrier frequency range

0.5 to 15 kHz

Protective functions

Over-current, overload, braking resistor overload, over voltage, EEPROM error, under-
voltage error, CT (current transformer) error, CPU error, external trip, USP error, 
ground fault, input over voltage, instantaneous power failure, expansion card 1 error, 
expansion card 2 error, inverter thermal trip, phase failure detection, IGBT error, 
thermistor error

Environ-
ment

Temperature (*9)

Operating (ambient): -10 to 50

°

C / Storage: -20 to 65

°

C

Humidity

20 to 90% humidity (non-condensing)

Vibration  *10

Models SJ300–004xxx to 220xxx:  5.9 m/s

2

 (0.6G), 10 to 55 Hz

Models SJ00–300xx to 1500xxx: 2.94 m/s

2

 (0.3G), 10 to 55 Hz

Location

Altitude 1,000 m or less, indoors (no corrosive gasses or dust)

Coating color

Gray

Accessories Feedback PCB

SJ-FB (vector control loop speed sensor)

Digital input PCB

SJ-DG (4-digit BCD / 16-bit binary)

Others

EMI filters, input/output reactors, DC reactors, radio noise filters, braking resistors, 
braking units, LCR filter, communication cables, factory I/O network interface cards

Operator input devices

OPE–SRE (4-digit LED with potentiometer) / OPE–S (4-digit LED w/o potentiometer), 
Optional: OPE-SR (4-digit LED with potentiometer, Japanese/English overlay),
SRW–0EX Multilingual operator with copy function (English, French, German, Italian, 
Spanish, and Portuguese)

Item

General Specifications

Summary of Contents for SJ300 Series








Reviews: