--- 7 ---
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Models SP 18VB and SP 18SB Polishers by all
of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer
seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the
meaning of the precautions listed on the Name Plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of the polisher is listed in the Handling Instructions
to enhance the safe and efficient use of the tool by the customer. Salespersons must be thoroughly familiar with
the contents of the Handling Instructions to be able to offer appropriate guidance to the customer during sales
promotion.
7-2. Caution on Name Plate
The following basic precautions are listed on the Name Plate attached to the main body of each tool.
(1) For Taiwan
(3) For European countries
(2) For the U. S. A. and Canada
-- WARNING --
To reduce the risk of injury, user must read and understand instruction manual.
AVERTISSEMENT
Afin de reduire le risque de blessures, I'utilisateur doit lire et bien comprendre le
mode d'emploi.
(4) For China
7-3. Precautions on Usage
Never press the lock lever while the spindle is rotating:
If the lock lever is pressed while the spindle is rotating, the spindle will stop immediately.
In such a case, there is a danger that the wheel washer may be loosened so that the rubber pad and wool bonnet
fly off unexpectedly to cause possible serious injury.
Summary of Contents for SP 18SB
Page 27: ......
