Hitachi SPX-WKT2, Instruction Manual

NOTE

• When the timer is set, this remote controller will send the 

sleep timer information to indoor unit and the timer lamp 

of indoor unit turns on.

"        ","     " will be indicated when 

the sleep timer operation starts.

5 Select "Yes" by pressing "



" or "



" and press "OK".

  The setting will be confirmed and the sleep timer operation will 

be started, then the screen will return to the normal mode.

4 Press "OK" to finish the sleep timer setting.

  The confirmation screen will be displayed.

NOTE

• You can set the time of the sleep timer operation within the 

time range before "ON" timer (Simple timer) preset time.

3 Press "



" or "



" to set each setting content for the selected 

item. When "Timer Op." is selected, the setting contents are 

switched in order of "Not Used" <---> "Used" by pressing "



" 

or "



". When "Set time" is selected, the setting time can be 

set "1 hour", "2 hours", "3 hours" and "7 hours" by pressing 

"



" or "



" cyclically.

2 Press "



" or "



" to select the setting items. The setting 

items are displayed "Timer Op." and "Set time".

NOTE

• If the present time has not been set yet, automatically 

"Adjusting Date/Time" will be displayed.

• In this case, "      " is indicated on LCD of the normal mode. 

• Refer to "Adjusting Date/Time" section of this manual.

1 Select "Sleep Timer" from the menu and press "OK".

  The sleep timer setting will be displayed.

This function is Off Timer operation to stop the operation if 

preset time has passed when you sleep.

5.3  SLEEP TIMER OPERATION ("Functions" menu)

- 10 -