7 Select "Yes" and press "OK". The service menu will be displayed
after setting is confirmed.
If "No" is pressed, the screen will return to (3).
6 Repeat (3)-(5) to register the contact information 2.
Select "FIN." and press "OK", the confirmation screen will be displayed.
(Also press and the confirmation screen will be displayed. )
5 Select "FIN." and press "OK" (or simply press ). "Contact
information 2" will be displayed.
2 Press to change font type.
3 Press "
" to select letter.
4 Press "OK" to confirm the letter. (Max.: 28 letters)
1 Select "Contact information" from the service menu and press "OK".
The contact information 1 will be displayed.
Contact information can be registered from "Contact information".
9. CONTACT INFORMATION REGISTRATION (SERVICE MENU)
2 Select "Yes" by pressing "
"or "
" and press "OK". The setting
will be confirmed and the screen will return to the normal mode.
1 Press and hold and simultaneously for at least 3 seconds
during the normal mode (when unit is not operated).
The service menu will be displayed.
Select "Display room temp" from the service menu and press "OK".
The confirmation screen will be displayed.
Room temperature(around remote controller) can be displayed
8. DISPLAY ROOM TEMPERATURE (SERVICE MENU)
English
- 7 -
Summary of Contents for SPX-WKT2
Page 8: ......
