OEM MANUAL:K6602924
5 COMMAND DESCRIPTIONS
Revision: 1 / Date: 2003.03.06
Page: 106 / 273
Table 5.30 Start-Stop Cycle Counter Page(Page Code = 0EH) (cont’d)
22
(MSB)
Accounting Date Week
23
(2 ASCII Characters)
(LSB)
24
(MSB)
Parameter Code (0003H)
25
Specified Cycle Count Over Device Lifetime
(LSB)
26
DU
DS
TSD
ETC
TMC
LBIN
LP
27
Parameter Length (04
H
)
28
(MSB)
•
Specified Cycle Count Over Device Lifetime
•
(4 Byte Binary Number)
31
(LSB)
32
(MSB)
Parameter Code (0004
H
)
33
Accumulated Start-Stop Cycles
(LSB)
34
DU
DS
TSD
ETC
TMC
LBIN
LP
35
Parameter Length (04
H
)
36
(MSB)
•
Accumulated Start-Stop Cycles
•
(4 Byte Binary Number)
39
(LSB)
The year and week in the year that the device was manufactured shall be set in
the parameter field defined by parameter code 0001
H
. The date of manufacture
shall not be savable by the initiator via the LOG SELECT command. The date is
expressed in numeric ASCII characters (30
H
- 39
H
) in the form YYYYWW, as shown
in Table 5.30.
The accounting date specified by parameter code 0002H is a parameter that may
optionally be savable via the LOG SELECT command to indicate when the device
was placed in service.
LOG SELECT:(4Ch)