34
ENGLISH
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)
Setting Picture Adjustment (continued)
Selected Items
Setup hint
Contrast Mode
Dynamic It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast
feeling.
Normal : Improve the contrast feeling to reproduce a
faithful gradation.
Linear : Reproduce as faithful gradation as possible.
Normal
Linear
3D Color Management
Off On : It automatically adjusts the suitable tint, color density,
and brightness on images.
Off : Set it off if the image does not look natural.
On
Black Enhancement
Off
Adjusts the black level compensation.
Low
Middle
High
3D Comb Filter
Off This function is available only if D-sub 15 pin - composite
cable is used.
This reduces the dot and color blurring in minute scales so
that it can reproduce purer color.
This is not available for NTSC4.43, PAL60, SECAM,
PAL-N and PAL-M system.
This is available only when receiving NTSC3.58/PAL
composite signal.
Low
Middle
High
Reset
Each item on this menu screen can be restored to the
factory settings by pressing the
OK
button.
Color Temp. Adjust
On
Amplitude
On: When you want to set specific adjustments in each of
the 3 Color Temperature modes. You can adjust on
the Amplitude and Cut Off. The settings reflect on the
Color Temperature.
Amplitude: Subdue the colors (Red/Green/Blue) on
the brighter parts (-63~0).
Cut Off : Subdue the colors (Red/Green/Blue) on
the darker parts (-31~+31).
Reset (Available when On): Select to restore amplitude
and Cut Off adjustments to default settings by pressing the
OK
button.
Off: Remains as default setting.
Red
Green
Blue
Cut Off
Red
Green
Blue
Reset
Off
