23
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input
1.
Connect to external equipment. (See
14
and
15
for details.)
2.
Press the
or
button to switch to HDMI mode.
Press the
or
button to switch to composite mode.
3.
Press the
button.
Setting Picture Adjustment
You can adjust the display condition such as colour settings.
Select
“Picture”
from Menu list.
Selected Items
Setup hint
Picture Mode
Dynamic
You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Dynamic: Suitable for brighter conditions.
Natural : Suitable for normal lighting conditions.
Cinema : Suitable for watching movies.
Natural
Cinema
Contrast
-31~+31
(+32~+40)
This adjusts the contrast to meet the surrounding
brightness by using the
◄►
button.
The maximum value is extended up to [+40] by pressing
the
button for more than 2 seconds at [+31]. The
value between [+32] ~ [+40] appears in magenta. This is
the special feature for dark images, so it is recommended
to set the value less than [+31] under normal conditions.
Brightness
-31~+31
Adjust brightness according to personal preference by
using the
◄►
button.
Colour
-31~+31
Adjust colour according to personal preference by using
the
◄►
button.
Sharpness
-15~+15
Preferred sharpness can be adjusted by pressing the
button for softer image or the
button for sharper image.
Hue
-31~+31
Pressing the
button enhances red and weakens green,
whilst pressing the
button weakens red and enhances
green. The setup hint is to adjust for realistic skin colour.
Colour Temperature
Cool
You can select from 3 settings depending on the colour
condition using the
◄►
button.
This is not available when “Deep Colour” is “On” in HDMI
mode.
Normal
Warm
Back Light
-20~+20
Adjust the brightness of the Back Light for maximum
visibility.
Reset
Each item on this menu screen can be restored to the
factory settings by pressing the
OK
button.
Picture
Picture Mode
Dynamic
Contrast +31
Brightness –31
Colour 0
Sharpness +15
Hue 0
Colour Temperature Normal
Back Light +20
Reset
Reset
Select OK Set Return
Picture Dynamic
Deep Colour
Off
Contrast Mode
Normal
3D Colour Management Off
Black Enhancement
Off
DNR
Off
MPEG NR
Off
Cross Colour NR
Off
Game Mode
Off
Film Mode
Off
3D Comb Filter
Off
Reset
Reset
Select OK Set Return
Picture Dynamic
Colour Temp. Adjust
Select OK Set Return
* The OSD screen may be different depending on the model.
