background image

Limited Warranty For USA Customers Only

Hitachi America, Ltd. (HAL) warrants our Hitachi color monitor to be free from defects in
material and workmanship for 36 months from the date you purchased it from your
authorized HAL dealer. In the event of a defect during this 36 months period, HAL will, at its
option, repair or replace the monitor at no charge except as set forth below.
This warranty extends to the original purchaser only and cannot be transferred to another
individual or company.  HAL’s entire liability and your exclusive remedy for valid warranty
claims shall be that HAL will repair your monitor with new or reconditioned parts or replace
it with a comparable new or reconditioned monitor, and any replaced  monitors or parts
become 

HAL’s property.

This limited warranty does not cover damage occurring after you purchase the monitor in
shipping or in storage or that caused by abuse,  accident, disaster, misuse, mishandling,
mispackaging or shipping,  improper installation, unauthorized repair or modification,  or
failure to follow the manufacturer's instruction with respect to the proper handling,
operation, installation, service and maintenance of the monitor.
To obtain warranty service, call 1-800-536-6721 for a return authorization number and the
location of your nearest HAL service center, or return the monitor to the dealer from whom
you bought it.  If you choose to ship the monitor to us rather than delivering it in person, you
must assume the risk of damage or loss in transit. You must also use the original shipping
container (or equivalent packaging), pay shipping charges, and enclose a copy of the proof
of purchase date with the monitor. For additional information, please write to:

Hitachi America, Ltd.

2000 Sierra Point Parkway,
Brisbane, CA 94005-1835

NEVER open the monitor cabinet.  If the monitor is not operating properly, contact the HAL
service center (Call 1-800-536-6721).  Do not  open the monitor housing under any
circumstances. By opening the monitor housing you will expose yourself to high voltage
and possible severe electrical shocks and void all warranties.

HAL MAKES NO OTHER WARRANTIES REGARDING THESE PRODUCTS.  NO
PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY OR COMPANY IS
AUTHORIZED TO CHANGE, MODIFY OR AMEND THE TERMS OF THIS LIMITED
WARRANTY  IN ANY WAY. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS MONITOR IS LIMITED TO THE 36
MONTH DURATION OF THIS WRITTEN WARRANTY.  ALL WARRANTIES SET FORTH
IN THIS WARRANTY ARE LIMITED TO 36 MONTHS FROM THE DATE OF PURCHASE.
NO WARRANTIES WHATSOEVER WILL  COVER THIS MONITOR BEYOND 36
MONTHS.  HOWEVER, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.

Summary of Contents for V810






















Reviews: