background image

IDENTIFICATION AND OPERATION OF CONTROLS 

 

20

18. "AV IN/OUT" Jack (Behind the door) 

Use the RF output adapter (provided) to connect this jack to a TV to view the pictures played 
back by the camera/recorder. 
Use the AV input cord (provided) to connect this jack to a TV or VCR to record pictures from the 
VCR or TV. 

19. Hand Strap 

Adjust to best fit your hand. 
20

. Power Supply Attachment Section 

Attach the battery (provided) or external power adapter (provided) here. 

21. Date/Time Battery Compartment 

Pull the battery holder and install the date/time battery (provided). 

 

Bottom view/Remote Control Illustration 

22. Power Switch 

This turns the camera/recorder on and off and also switches between the camera and VCR 
modes. Set the switch to "

CAMERA

" to turn the camera's power on and to "

VIDEO

" to turn the 

VCR's power. 
Press and hold the small red button in the switch to switch it. 

23. "PLAY" Button 

Used for playback of tapes. 

NOTE:

 When the camera/recorder is in record/pause (stand-by) mode, pressing and holding this 

button will play the tape at normal speed. 

24. "F.FWD" Button 

Press this button during stop or rewind mode, and fast-forwarding starts. 
Press the button during playback of tape, and the tape is played back in the forward direction 
approximately 9 times faster than the normal speed to confirm the recorded content. 
Press "

PLAY

" button to return to normal playback mode or press "

STOP

" button to stop tape 

movement. Also use "

F.FWD

" button when setting the date/time. 

NOTE:

 You can also visually scan forward when the camera/recorder is in record/pause (stand-by) 

mode by pressing and holding this button. 

25. "REW" Button 

Press this button during stop or fast forward mode, and fast-rewinding starts. Press the button 
during playback of tape, and the tape is played back in the rewind direction approximately 7 
times faster than the normal speed to confirm the recorded contents. 
Press "

PLAY

" button to return to normal playback mode or press "

STOP

" button to stop tape 

movement. Also use "

REW

" button when setting the date/time. 

NOTE:

 You can also visually scan backward when the camera/recorder is in record/pause (stand-

by) mode by pressing and holding this button. 

26. "STOP" Button 

The "

STOP

" button is used to stop playback, rewind, and fast forward operations. The "

STOP

button has no effect during camera record operation. Also use "

STOP

" button when setting the 

date/time. 

27. "PAUSE" Button 

When this button is pressed in the playback mode, the tape stops and you can view a still 
picture. When this button is pressed again, the tape runs to resume playback. 

28. "TITLE" Button 

Press this button to create and record personalized titles on your videos with the 
camera/recorder's built-in titler. (See "

TITLE RECORDING

" on page 32.) 

29. "REVIEW" Button 

Used to review the last few seconds of the recorded segment in the record/pause mode. 
 

Summary of Contents for VMH-38A - Camcorder






















































Reviews: