background image

Getting Started 

Using Alternative Power Sources 

Using the AC Adapter/Charger 

Please ensure that the CAMERA/OFF/VIDEO switch is in the OFF position whenever 
attaching or detaching any power supply (ie. battery, AC adapter/charger, etc.) 

 

1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide 
blade fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the 
blades fully into the outlet either contact an electrician to replace your obsolete outlet, or 
use a polarized cord or outlet accessory. 
2. Align the arrow on the external power adapter with the guide arrow on the 
camera/recorder. 
3. Hold the external power adapter firmly against the camera/recorder while sliding it 
towards the right of the machine. 
4. Connect the external power adapter plug to the DC OUTPUT jack of the AC 
adapter/charger. 

Note:

 The AC adapter/charger can be used around the world. An AC plug adapter is 

required in some foreign countries. If you need one purchase it at your Hitachi distributor. 

 

Note:

 The battery level indicator sometimes displays partial charge symbol when using the 

AC adaptor/charger. Ignore this indicator when using the AC adaptor/charger. 

Using Alkaline Dry-Cell Batteries 

The camera/recorder can be powered with six alkaline dry-cell batteries inserted into the 
optional battery case (Hitachi VM-BP86C) which can be attached to the 
camera/recorder. The operation time of the camera/recorder depends on the type of 
alkaline batteries used. Six special high-quality alkaline batteries can power the 
camere/recorder for about 50 minutes. Please ensure that the CAMERA/OFF/VIDEO 

Summary of Contents for VMH-57A - Camcorder
































































Reviews: