background image

IMPORTANT SAFEGUARDS 

 

7

might be fatal.  Installing an outdoor antenna can be hazardous and 
should be left to a professional antenna installer. 

USE 

14  Cleaning

 -- Unplug this video product from the wall outlet before 

cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp 
cloth for cleaning. 

15  Object and Liquid Entry

 -- Never push objects of any kind into this 

video product through openings as they may touch dangerous voltage 
points or short-out parts that could result in a fire or electric shock.  Never 
spill liquid of any kind on the video product. 

 

 

 

 

 

16  Lightning

 -- For added protection for this video product during a 

lightning storm, or when it its left unattended and unused for long periods 
of time, unplug it from the wall outlet and disconnect the antenna or cable-
system.  This will prevent damage to the video product due to lightning 
and power-line surges. 

 

 

 

 

 

 

 

 

 

 

 

SERVICE 

17  Servicing

 -- Do not attempt to service this video product yourself as 

opening or removing covers may expose you to dangerous voltage or 
other hazards.  Refer all servicing to qualified service personnel. 

18  Conditions Requiring Service

 -- Unplug this video product from the 

wall outlet and refer servicing to qualified service personnel under the 
following conditions. 
a. When the power-supply cord or plug is damaged 
b. If liquid has been spilled or objects have fallen into the video product. 
c. If the video product has been exposed to rain or water. 
d. If the video product does not operate normally by following the 
operating instructions.  Adjust only those controls that are covered by the 
operating instructions.  Improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the video product to its normal operation. 
e. If the video product has been dropped or the cabinet has been 

Summary of Contents for VT-F381A

















































Reviews: