CABLE BOX SETUP
ON:
The screen becomes blue and mutes sound when a channel without a broadcast signal on the VCR or a channel
on which broadcasting has finished.
If the signal is too strong, this function may not operate even if you specify ON. During
playback this function does not operate.
OFF:
The AUTO BLUE feature is switched off.
5 Press the GUIDE button to end the setting.
CABLE BOX SETUP
The following setup allows the VCR channel to automatically switch to the cable box output channel during
delayed recording.
Note:
This setup should be performed if you receive all channels through a cable box.
(Hookups [E], [F], or [G]).
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the
cursor button to select the SETUP option and then press the ENTER button.
4 Press the
cursor button to select the CHANNEL and then press the ENTER button.
5 Press the
cursor button to select CATV2, and then press the GUIDE button to end this setting.
Summary of Contents for VT-FX6510A
Page 6: ...IMPORTANT SAFEGUARDS ...
