PREPARATION FOR USE
23
• Use the remote control for this procedure.
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Confirm "CHANNEL SET UP" is pointed to then, press F.FWD/
button.
3) Confirm "AUTO TUNING" is pointed to, then press the F.FWD/
button. After scanning, the tuner stops at the lowest
memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
CHANNEL SET UP
→
AUTO TUNING
ADD/DELETE
CH
SELECTING THE LANGUAGE
If you want to change the language on the TV screen, follow the steps below:
Note:
This feature WILL NOT change the audio (sound) coming out of the VCR only the screen menu.
• Use the remote control for this procedure.
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Press
/PLAY or
/STOP button repeatedly to point to "LANGUAGE SELECT". Then, press F.FWD/
button.
3) Select "ENGLISH" or "ESPAÑOL"=Spanish by using the
/PLAY or
/STOP button.
LANGUAGE SELECT
→
ENGLISH [ON]
ESPAÑOL
4) Press the RESET/EXIT button to return to TV mode.
NOTE:
If for some reason the menu is in Spanish, press the MENU button until "PARA INICIAR" menu appears, press the
/PLAY button to point to "SELEC.IDIOMA", press the F.FWD/
button, press the
/PLAY button to point to
"ENGLISH", then press the RESET/EXIT button.