Using the satellite receiver
TV channels from a satellite receiver (connected to the scart
socket
EXT.1 AV. 1
) are received on the video recorder on
programme number '
E1
'.
To do this, select the programme number '
E1
' with
0
on the
remote control.
You should select the TV channels to be received by the
satellite receiver directly on the receiver itself.
Automatic TV channel search
During installation, all available TV channels are searched for
and saved. If the channel assignments of your cable or
satellite TV provider change or if you are reinstalling the video
recorder, e.g. after moving house, you can start this procedure
again. This will replace the TV channels already saved with the
new ones.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press the
MENU
button on the remote control. '
CLK
' will
appear on the display.
3
In the display, select '
AUTO
' (Automatic TV channel
search) with
P-
=
or
;
P+
.
4
Press
OK
.
5
The automatic TV channel search starts. This allows the
video recorder to save all available TV channels. This
procedure may take several minutes.
6
When the TV channel search is complete, '
OK
' will appear
on the screen.
7
To end, press
MENU
.
You can read about how to search for a TV channel manually
in the section 'Manual TV channel search'.
Monitor function
You can switch back and forth between the TV picture and
video recorder picture with
VTR/TV
. But this only works
when you use a scart cable to connect the video recorder to
your TV set and your TV set responds to this switch-over.
You can also use
VCR/TV
on the video recorder.
Sorting and clearing TV channels
manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions
(programme numbers) of the video recorder. You can use this
function to individually sort the TV channels already saved or
to delete unwanted TV channels or those with poor reception.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
MENU
on the remote control. '
CLK
' will appear on
the display.
3
In the display, select '
ALLO
' (Manual TV channel search)
with
P-
=
or
;
P+
.
4
Press
OK
.
CH21
5
Using
;
P+
or
P-
=
, select the saved TV channel that
you want to assign to the programme number '
01
'.
6
Confirm with
OK
.
7
The next highest programme number (e.g. '
02
') will briefly
appear in the display. After that, the channel number of
the already allocated TV channel will blink.
8
Using
;
P+
or
P-
=
, select the saved TV channel that
you want to assign to this programme number (e.g. '
02
').
Deleting TV channels
Unwanted channels or those with poor reception can be
deleted using
CLEAR (CL)
.
9
Confirm with
OK
.
0
To assign other TV channels to a programme number,
repeat steps
7
to
9
.
A
Confirm the assignment of the TV channel with
MENU
.
B
To exit the main menu, press
MENU
.
9