Note:
If any of the TIMER blocks are in use, ’
k
’ will light up
on the video recorder display.
* While a programmed recording is being made, you cannot
operate your video recorder manually. If you want to cancel
the programmed recording, press
STANDBY
m
.
* If you reach the end of the cassette during a recording,
the video recorder will automatically eject the cassette.
* If you have put in a cassette that cannot be recorded on,
the cassette will be ejected. ’
PROTECTED CASSETTE
’
will briefly appear on the TV screen.
* If the video recorder is switched on a few minutes before
a programmed recording is to start, ’
SWITCH TO
STANDBY- TIMER RECORDING
’ will flash on the TV
screen.
* If you forget to put a cassette in the machine, ’
NO
CASSETTE
’ will appear on the TV screen. ’
k
’ will flash In
the video recorder display.
* If ’
ALL TIMERS OCCUPIED
’ appears on the TV screen
when you press
TIMER
, you have used up all the available
TIMER blocks. If you want to clear or check a programmed
recording (TIMER block), select it with
;
P+
or
P-
=
.
* If ’
DATA ERROR
’ briefly appears on the screen, this
means that the TIMER information has not been transferred.
Please check date, start time and end time of the
programmed recording
* Programme numbers ’
E1
’ and ’
E2
’ are for recordings from
other sources (through scart socket
AV1 EXT1
or
AV2 EXT2
).
How to check or change a programmed
recording (TIMER)
1
Switch on the TV set and select the programme number
for the video recorder.
2
Press
TIMER
on the remote control
twice
.
3
Select the programmed recording (TIMER) you want to
check or change with
P-
=
or
;
P+
.
4
Press
TIMER
.
5
Select the entry field with
Q
or
P
.
6
Change any information with
P-
=
or
;
P+
or with the
0-9
number buttons.
7
Confirm with
OK
.
8
Make sure that the cassette you have put in can be
recorded on. Switch off with
STANDBY
m
.
Note:
The programmed recording will only function when
the video recorder is
switched off
with
STANDBY
m
.
How to clear a programmed recording
(TIMER)
1
Switch on the TV set and select the programme number
for the video recorder.
2
Press
TIMER
on the remote control
twice
.
3
Select the programmed recording (TIMER) you want to
clear with
P-
=
or
;
P+
.
4
Press
CLEAR (CL)
.
The programmed recording (TIMER) has now been
deleted.
5
To end, press
MENU
.
20
