background image

4

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)   Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat registers, stoves,      

or other apparatus (including amplifiers) that produce heat.

9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A          

polarized plug has two blades with one wider than the other. A grounding type 

plug  has two blades and a third grounding prong. The wide blade or the third  

prong are  provided for your safety. If the provided plug does not fit into your    

outlet, consult  an electrician for replacement of the obsolete outlet.

10)  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

11)    Only use attachments/accessories specified by the manufacturer.
12)  Use only with cart, stand, tripod, bracket, or table specified by the   

manufacturer, or sold with the apparatus. When a cart is used, use 

caution when moving the cart/apparatus combination to avoid injury 

from tip-over.

13)  Unplug this apparatus during lightning storms or when unused for long 

periods of time.

14)  Refer all servicing to qualified service personnel. Servicing is required when 

the apparatus has been damaged in any way, such as power-supply cord 

or plug is damaged, liquid has been spilled or objects have fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped.

15)  Apparatus should not be exposed to dripping or splashing, and objects filled 

with liquids, such as vases, should not be placed on the apparatus.

16)  Do not overload wall outlets and extension cords, as this can result in a risk of 

fire or electric shock.  

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for W100



































Reviews: