--- 28 ---
Fig. 11
Magnet (E)
[28] <25>
Armature Ass'y DC 12V
[26] <23>
(pinion)
Dust Guard Fin (B)
[29] <26>
Brush Block
[30] <27>
Adjust the convex of dust guard fin (B)
to the concave of the brush block.
Damper
[24] <21>
Ring Gear (C)
[21] <18>
Inner Cover (A)
[25] <22>
Inner Cover (A)
[25] <22>
Armature Ass'y
DC 12V
[26] <23>
(11) Removal of the Armature Ass'y DC 12V
[26] <23>
Support Inner Cover (A)
[25] <22>
so that it does not contact the
fan of the Armature Ass'y DC 12V
[26] <23>
. With a hand press,
push down the tip portion of the Armature Ass'y DC 12 V
[26]
<23>
(pinion) to remove it.
(12) Removal of Ring Gear (C)
[21] <18>
and the Damper
[24] <21>
Remove Ring Gear (C)
[21] <18>
from Inner Cover (A)
[25] <22>
and remove the Damper
[24] <21>
with a small flat-blade
screwdriver. Ring Gear (C)
[21] <18>
is firmly inserted in Inner
Cover (A)
[25] <22>
. Insert a small flat-blade screwdriver
between Ring Gear (C)
[21] <18>
and Inner Cover (A)
[25] <22>
to remove Ring Gear (C)
[21] <18>
. Remove the Damper
[24]
<21>
with a small flat-blade screwdriver.
[21] <18>
[22] <19>
[23] <20>
[24] <21>
[25] <22>
Fig. 12
Side Yoke
[27] <24>
Armature Ass'y
DC 12V
[26]
<23>
(pinion)
Summary of Contents for WH 12DMR
Page 47: ......