--- 30 ---
(d) Mount a unit of Inner Cover (A)
[25] <22>
(including the Armature Ass'y DC 12 V
[26] <23>
), Magnet (E)
[28]
<25>
(including Dust Guard Fin (B)
[29] <26>
and Side Yoke
[27] <24>
) and Brush Block
[30] <27>
into
housing (A) (See Fig. 18). Pay attention to the following items.
Adjust the protrusions of Dust Guard Fin (B)
[29] <26>
to the concave portions of Magnet (E)
[28] <25>
and
also adjust the outside diameter of Dust Guard Fin (B)
[29] <26>
to the outside diameter of Magnet (E)
[28]
<25>
when mounting Dust Guard Fin (B)
[29] <26>
to Magnet (E)
[28] <25>
(see Fig. 15).
Adjust the protrusions of the Side Yoke
[27] <24>
to the concave portions of Magnet (E)
[28] <25>
and also
adjust the outside diameter of the Side Yoke
[27] <24>
to the outside diameter of Magnet (E)
[28] <25>
when mounting the Side Yoke
[27] <24>
to Magnet (E)
[28] <25>
(see Fig. 15).
Insert the two Dampers
[24] <21>
so that they fit into Inner Cover (A)
[25] <22>
. Fit the locking rib of Ring
Gear (C)
[21] <18>
to the concave portion of Damper
[24] <21>
. Press-fit the Armature Ass'y DC 12V
[26]
<23>
into Inner Cover (A)
[25] <22>
.
Adjust the convex portion of Dust Guard Fin (B)
[29] <26>
to the concave portion of the Brush Block
[30]
<27>
(see Fig. 16).
Adjust the concave portions (for locking) of Magnet (E)
[28] <25>
to the protrusions of housing (A) (see
Figs. 15 and 17).
Fig. 15
Fig. 17
Dust Guard Fin
(B)
[29] <26>
Brush Block
[30] <27>
Concave
portions
Convex
portions
Align the protrusions of housing (A) to the concave
portions (for locking) of Magnet (E)
[28] <25>
.
Housing (A)
Fig. 16
Concave
portions
Protrusions
[27] <24>
[28] <25>
[29] <26>
Summary of Contents for WH 12DMR
Page 47: ......