43
Scene file
When taking scenes having different conditions, the settings need to be optimized for each scene. The scene file
function enables setting the conditions for each scene beforehand and storing them in memory for instant recall at
the required time. The 4 scene files can be used for storing 4 sets of scene conditions.
File storage items
Type
Item
Details
CONTRAST
OFF, NORM,
HIGH
AUTO IRIS
AVERAGE, PEAK
GAIN LOW
-3,0dB
2a
GAIN MID
+6,+9,+12dB
GAIN HIGH
+12,+18,+24dB
MASKING
OFF, PRESET,
MEMORY
GAMMA
OFF, PRESET,
MEMORY
DTL LEVEL
OFF,-128,....+127
DTL FREQ
SOFT,
STANDARD,
SHARP
FLESH TONE GAIN
-128,....+127
FLESH TONE PHASE
-128,....+127
FLESH TONE WIDTH
-128,....+127
2b
White balance data
(each filter)
(Remote mode)
2c
SHUTTER SELECT
1/100,1/250,...
Var, AES, CC FRM
Setting steps
1.
Select the file number with the Scene File switch
(adjust camera to the status previously stored in the memory).
2.
Set the file storage items
(if changing the memory contents).
a
．
Set the Function 1 page items from the setting menu.
(See page 45.)
b
．
Operate auto white balance and store the adjustment in memory
(one memory is provided for each of the 4 filters).
(See page 39.)
c
．
Set the shutter and store the setting in memory.
(See page 41.)
Note) Data are stored in the selected file simultaneously with setting.
FUNCTION 1 SCENE 1
CONTRAST :OFF
AUTO IRIS :AVERAGE
GAIN LOW :0dB
MID :9dB
HIGH :18dB
DTL :‑>
MASKING :PRESET
GAMMA :PRESET
INITIALIZE
DTL SCENE 1
DTL LEVEL :0
DTL FREQ :STANDARD
FLESH TONE
LEVEL :‑128
AUTO SETUP:
PHASE :97
WIDTH :0
