SAFETY
S-20
TRANSPORT SAFELY
•
Take care the machine may turn over when loading or un-
loading the machine onto or off of a truck or trailer.
• Observe the related regulations and rules for safe trans-
portation.
• Select an appropriate truck or trailer for the machine to
be transported.
• Be sure to use a signal person.
• Always follow the following precautions for loading or
unloading:
1. Select solid and level ground.
2. Always use a ramp or deck strong enough to support the
machine weight.
3. Turn auto-idle switch OFF.
4. Always select the slow speed mode with the travel mode
switch.
5. Never load or unload the machine onto or off a truck or
trailer using the front attachment functions when driving
up or down the ramp.
6. Never steer the machine while on the ramp. If the travel-
ing direction must be changed while the ramp, unload
the machine from the ramp, reposition the machine on
the ground, then try loading again.
7. The top end of the ramp where it meets the flatbed is a
sudden bump. Take care when traveling over it.
8. Place blocks in front of and behind the tires. Securely
hold the machine to the truck or trailer deck with wire
ropes.
Be sure to further follow the details described in the TRANS-
PORTING section.
035-E07A-0454
SA-395
Summary of Contents for ZAXIS 120-3 class
