manualshive.com logo in svg

Hitachi ZW 180-6, Operator'S Manual

The Hitachi ZW 180-6 Operator's Manual is an essential resource for anyone operating this powerful machine. With detailed instructions and safety guidelines, this manual ensures smooth and efficient operation. Download your free copy today from 88.208.23.73:8080, and unlock the full potential of this incredible product.

Share
Download
background image

14-2

INDEX

Check Rearview Mirror and Inside Rearview Mirror ......7-111

Check Refrigerant .......................................................................7-106

Check Ride Control Accumulator Function, Gas  

Leakage, Looseness, and Damage (Option) ..................7-59

Check Right and Left Brake Interlocking Performance ...7-90

Check ROPS Cab, Resin Cab Roof, and Roof Mounting  

Bolts ...........................................................................................7-108

Check Sound Absorbing Mat Around Engine ..................7-112

Check Steps and Handrails for Damage and  

Looseness ................................................................................7-111

Check Surroundings Around Axle and Covers for  

Oil Leaks .....................................................................................7-46

Check the Hour Meter Regularly ................................................7-3

Check Tire for Damage ...............................................................7-94

Check Transmission Oil Level ...................................................7-40

Check Vibration Damper ............................................................7-39

Check Wheel Bolt Torque ...........................................................7-95

Check Windshield Washer Fluid Level .................................7-108

Check Work Lights ........................................................................7-87

Cigar Lighter (24 V DC Electrical Outlet) ............................1-109

Clean Axle Housing Air Breather .............................................7-46

Clean Engine Compartment and Hood ..............................7-112

Clean Fuel Solenoid Pump Strainer .......................................7-71

Clean Radiator/Oil Cooler and Other Cooling System ....7-81

Clean Suction Filter ......................................................................7-52

Clean/Replace Air Conditioner Circulation/Fresh Air  

Filters .........................................................................................7-100

Cleaning of Rear View Camera Lens ....................................7-112

Clearance Light Indicator (Green) ..........................................1-18

Coat/Hat Hook .............................................................................1-126

Cold Weather Warm Up ..............................................................3-12

Communication Error Indicator (Yellow) .............................1-13

Components Name .............................................1-1, 1-111, 1-118

Control Lever Lock ..........................................................................5-4

Control Lever Lock Indicator (Red) .........................................1-18

Controller Part Name and Function .....................................1-112

Cool Head/Warm Feet Operation .........................................1-116

Coolant Temperature Gauge ....................................................1-16

Cooling Operation .....................................................................1-115

Cooling System .............................................................................7-76

Correct Maintenance and Inspection Procedures ...............7-1
D 
Date Adjustment ..........................................................................1-48

Date and Time................................................................................1-46

Declutch Brake ..............................................................................1-86

Declutch Position Switch ...................................................1-98, 5-5

DEF/AdBlue® Level Alarm ..........................................................1-31

DEF/SCR System Alarm ...............................................................1-31

Default Setting ..............................................................................1-20

Defroster Operation ..................................................................1-116

Dig with Caution ........................................................................... S-18

Discharge Warning Indicator (Red) ........................................1-13

Display Item Selection ................................................................1-62

Display Mode Setting..................................................................1-50

Displaying Basic Screen .............................................................1-22

Dispose of Waste Properly ......................................................... S-35

Door Lock Knob ..........................................................................1-129

Door Open/Close Lever ............................................................1-129

Dozing ..............................................................................................5-21

Drain Fuel Filter .............................................................................7-68

Drain Water and Sediment from Fuel Tank..........................7-67

Drive Machine Safely (Work Site) ............................................ S-13

Drive on Snow Safely .................................................................. S-14

Drive Safely ..................................................................................... S-12

Drive Safely with Bucket Loaded ............................................ S-14

Drive Speed Change.......................................................................4-8

Driving the Machine .......................................................................4-1

DSS (Down Shift Switch) ..........................................................1-108

Dual Lift Arm Auto-Leveler .......................................................1-38
E 
Electric Power Output (12 VDC Electrical Outlet) ...........1-119

Electrical System ...........................................................................7-82

Emergency Exit Hammer .........................................................1-126

Emergency Stop and Restart of Operation .........................4-11

Emergency Stopping ..................................................................4-19

Engine ...............................................................................................7-32

Engine Oil Low Pressure Indicator (Red) ..............................1-14

Engine Warning Indicator (Red) ..............................................1-14

Ensure Safety Before Rising from or Leaving  

Operator’s Seat ...........................................................................S-7

Ensure Safety When Operating on Road Shoulders ........5-14

Equipment of Head Guard, ROPS, FOPS ............................... S-11

Evacuating in Case of Fire .......................................................... S-30

Excavation .......................................................................................5-15
F 
Fan Reverse Rotation Switch ..................................................1-101

Fasten Your Seat Belt ......................................................................S-7

Fastening Machine for Transporting ........................................6-4

Feature ...........................................................................................1-110

Fingertip Control Type ........................................................1-9, 1-91

Follow Safety Instructions ............................................................S-2

For Rapid Cooling .......................................................................1-117

Forward/Reverse Lever ...............................................................1-87

Forward/Reverse Lever/ Shift Switch ....................................1-87

Forward/Reverse Selector Switch ...........................................1-97

Front Console ....................................................................................1-8

Front Interior Light .....................................................................1-125

Front/Rear Wiper Switch ............................................................1-89

Fuel Consumption ........................................................................1-67

Fuel Gauge ......................................................................................1-16

Fuel System .....................................................................................7-65

Fuse Box .........................................................................................1-120

Fuse Box A .....................................................................................1-121

Fuse Box B .....................................................................................1-121
G 
General Precautions for Cab ........................................................S-5

Grading ............................................................................................5-17

Greasing ...........................................................................................7-24
H 
Handle Chemical Products Safely ........................................... S-35

Summary of Contents for ZW 180-6











































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZW 180-6

Brands by name

Popular brands

Load more brands