DRIVING MACHINE
4-8
Drive Speed Change
The transmission gear range can be selected by turning shift
switch (1).
Refer to item 6 on page 4-4 for the auto-shifting mode.
1st and 2nd speed : To be used for excavation and
loading work
3rd and 4th speed : To be used for traveling
operation.
f
NOTE: Avoid rapid gear changes using shift switch (1)
while traveling at high speed. Shift the gear range only after
reducing the travel speed by releasing the accelerator pedal.
Changing Forward/Reverse Drive Direction
d
WARNING:
Before changing the drive direction, confirm that the
drive direction is clear.
To ensure operator's safety and ensure the longevity
of the power train system, change the machine drive
direction only after sufficiently reducing the drive
speed.
Be sure to change the machine drive direction only
when the machine travel speed is 13 km/h or slower
if the gear is in 3rd, 4th or 5th speed position.
1. Pull neutral lever lock (2) to the UNLOCK position.
2. Press the OFF position of parking brake switch (3).
3. Move forward/reverse lever (1) to the desired position.
F : Forward Driving
N : Neutral
R : Reverse Driving
MNEC-01-037
3
1
2
Summary of Contents for ZW 310-6
