SAFETY
S-14
Drive Safely with Bucket Loaded
If the machine is incorrectly operated while driving with the
bucket loaded, turning over of the machine may result. Be
sure to follow all the instructions indicated below.
When driving the machine on a job site with the bucket
loaded, hold the bucket as low as possible to keep the
machine balanced and to have good visibility.
Do not exceed the rated load capacity. Always operate
the machine within the rated load capacity.
Avoid fast starts, stops, and quick turns. Failure to do so
may result in personal injury and/or death.
Avoid rapid drive direction changes which could possibly
cause personal injury and/or death.
Drive on Snow Safely
Beware of the possibility of slipping or turning over the
machine when driving on frozen snow surfaces.
The machine may slip more easily than expected on
frozen snow surfaces even if the inclination is small.
Reduce speed when driving. Avoid fast starts, stops and
quick turns.
Road shoulder and/or set-up utilities covered with snow
are difficult to locate. Make sure of their location before
removing snow.
Be sure to use tire chains when driving on snow.
Avoid applying the brake for quick stops on snow. If a
quick stop is required, lower the bucket to the ground.
SA-452
SA-400
Summary of Contents for ZW 310-6
