TRANSPORTING
6-10
Lifting Machine
d
WARNING:
The lifting tools are optional. Install specified lifting
tools at your nearest Hitachi dealer.
Use lifting cables and other lifting tools being free
from any damage and/or aging, and having sufficient
strength.
Consult your nearest Hitachi dealer for correct lifting
procedures, and size and types of lifting cable and
tools.
Before lifting the machine, move the control lever
lock switch to the LOCK ( ) position to prevent the
machine from moving unexpectedly.
Rigidly secure the front and rear frames using the
articulation lock bar so that the machine front and
rear frames are not articulated.
Incorrect lifting procedure and/or incorrect wire rope
attachment will cause the machine to move (shift)
while being lifted, resulting in machine damage and/
or personal injury.
Do not lift the machine quickly. Excessive load will be
applied to the lifting wire ropes and/or lifting tools,
possibly causing them to break.
Do not allow anyone to come close to or under the
lifted machine.
Lifting
1. Straighten the machine and position the front
attachment horizontally as illustrated to the right.
2. Move the control lever lock switch in the LOCK ( )
position.
3. Rigidly secure the front and rear frames using the
articulation lock bar.
4. Stop the engine. Remove the key from the key switch.
5. Use cables long enough so that the cables do not come
in contact with the machine body when the machine is
lifted.
Wrap some protectors around wire ropes and/or support
bar as required to prevent the machine from being
damaged. Be sure to use the specified lifting tools.
6. Set a crane in an appropriate position.
7. Attach the cable to the lifting tools.
MNEC-05-001
Summary of Contents for ZW 310-6
