ZW370 FS 00-6
00 General Information
Outline
Inspection and maintenance table
Refer to Operation & Maintenance Manual for mainte-
nance procedures.
IMPORTANT
Severe application require more frequent mainte-
nance.
Severe conditions include heavy dust, extremely
abrasive material, caustic chemicals, extremely wet
conditions or abnormally hot or cold ambient temper-
atures.
: First time replacement or cleaning only
Section
Item for check
Operating hours
When
Required
10
50
250
500
1000
1500
2000
Engine
Check Engine Oil Level
Check Engine Coolant Level
Check Warning Lamps
Check Exhaust Gas
Drain Water and Sediment from Fuel Filter
Check Fuel Level
Check Drive Belt
Check Crankcase Breather Tube
Check Air Intake System
Check Cooling Fan
Drain Water and Sediment from Fuel Tank
Replace Fuel Filter Cartridge
Replace Engine Oil and Oil Filter Cartridge
Add DCA4 Coolant Additive
Inspect Automatic Belt Tensioner Pulley
Replace Fuel Tank Breather
Replace Coolant Filter Cartridge (One year or 1500 hours
whichever comes first.)
One year or 1500 hours
Clean Fuel Tank
Check and Adjust Valve Lash Clearance
Check Vibration Damper
Check Engine Compression Pressure
Check Injection Pressure
Clean Crankcase Breather Tube
Clean or Replace Air Cleaner Element
Clean Radiator / Air cooler / Hydraulic oil cooler / Fuel
cooler Fins
Clean or Replace Air Cleaner Element
After six cleanings or once a year
Replace Coolant
Every 2 years or 3000 hours
