Prevent the heat of content from being transferred to the instrument when installing the
■ Conditions for Installation and Adjustment
- Default connection is top type but it is
According to the dimensioned drawing, the connection and main unit must be leveled
and it is recommended to install a bracket to support the product if necessary.
-
Check Ex-
the temperature of measure object exceeds 350
product(HM
-
If the temperature
product (HM
shown below.
Installation
HITROL CO., LTD.
Prevent the heat of content from being transferred to the instrument when installing the
Conditions for Installation and Adjustment
Default connection is top type but it is customized to side to side, side to bottom.
According to the dimensioned drawing, the connection and main unit must be leveled
and it is recommended to install a bracket to support the product if necessary.
-proof rating and fluid temperature before applying an Ex
the temperature of measure object exceeds 350˚C, cannot use an Ex
(HM-90H-Ex).
temperature of measure object exceeds 120˚C, use a high
t (HM-90H, HM-90H-Ex), and insulate the main unit and connection as
shown below.
Vessel
Isolation valve
HM-90B
HM-30, 90 Series
13
Prevent the heat of content from being transferred to the instrument when installing the product.
customized to side to side, side to bottom.
According to the dimensioned drawing, the connection and main unit must be leveled
and it is recommended to install a bracket to support the product if necessary.
proof rating and fluid temperature before applying an Ex-proof product. If
C, cannot use an Ex-proof type
C, use a high-temperature
Ex), and insulate the main unit and connection as
