HM-90&95-Ex Series
HITROL CO., LTD.
18
User Training
Warranty
and Contact
■
Warranty and Service
This product is subject to a two-year warranty upon shipment and free service will
be provided for any damage found under normal operating conditions. If troubles
that occur are not due to product failure, service charge will apply.
You can request A/S from our website or by contacting our headquarters.
■
Headquarters, Factory, and Research Center (Contacts)
Address: HITROL CO., LTD. 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do,
Republic of Korea (Palhakgol-gil 98)
TEL.: (+82)-31-950-9700 (Headquarters and A/S)
FAX: (+82)-31-950-9796~9799 (Headquarters and A/S)
Do not apply a non-ex-proof product in an ex-proof zone.
An ex-proof product can be used where the environment and containers of the
object to be measured are type 1 and 2.
Read and understand the aforementioned and make sure that the temperature of
the object to be measured does not exceed 120℃ for general purpose. For an ex-
proof type, the maximum is 435℃. In addition, make sure that the ambient
temperature of the housing is kept at -20 ~ +60℃.
Ensure that a high-temperature cable is used for high-temperature products
(to prevent cable damage).
An ex-proof product is a pressure-resistance and ex-proof type, so do not open
the cover while using it.