WIRELESS
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
80
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
80
Hitron CGNM-2250 User’s Guide
Wireless Mode
Select the type of 5GHz wireless network that you want
to use:
802.11n 5g
: use IEEE 802.11n 5GHz.
NOTE:
At the time of writing IEEE 802.11n is the only
5GHz network type available.
NOTE:
Only wireless clients that support the network
protocol you select can connect to the wireless
network.
Channel Bandwidth
Select the 5GHz wireless channel bandwidth that you want
to use.
Wireless Channel
Select the 5GHz wireless channel that you want to use,
or select
Auto
to have the CGNM-2250 select the
optimum channel to use.
NOTE:
Use the
Auto
setting unless you have a specific
reason to do otherwise.
WPS Enabled
Use this field to turn WiFi Protected Setup (WPS) on or
off on the 5GHz network.
Select
ON
to enable WPS.
Deselect
OFF
to disable WPS.
Multiple SSID Settings
Multiple SSID
Click this to view settings for the main 5GHz SSID.
Network Name (SSID) Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE:
It is suggested that you change the SSID from
its default, for security reasons.
Enable
Use this field to enable or disable the SSID.
Select
ON
to enable the SSID.
Deselect
OFF
to disable the SSID.
Table 25:
The Wireless: Basic Settings Screen (5G) (continued)