Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
126
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
126
Hitron CODA-4x8x User’s Guide
7.3.2
Adding or Editing a Port Blocking Trusted Device
Rule
To add a new trusted device rule, click
Add Trusted PC
in the
Security
>
Port
Blocking
screen.
To edit an existing trusted device rule, locate the rule in the
Security
>
Port
Blocking
screen and click its
Manage
button.
The following screen displays.
Figure 51:
The Security: Port Blocking Trusted Device Add/Edit Screen
The following table describes the labels in this screen.
Table 40:
The Security: Port Blocking Trusted Device Add/Edit Screen
Host Name
Enter a name to identify the device.
IP Address
Enter the local IP address of the device.
Rule Status
Use this field to define whether the trusted device rule
should be active or not.
Select
Enabled
to activate the trusted device rule.
Select
Disabled
to deactivate the trusted device
rule.
Apply
Click this to save your changes to the fields in this
screen.
Close
Click this to return to the
Service Filter
screen without
saving your changes to the rule.
