Version 1.0, 11/2016. Copyright 2012 Hitron Technologies
73
Version 1.0, 11/2016. Copyright 2016 Hitron Technologies
73
Hitron CODA-4x8x User’s Guide
4.5
The Basic: Port Triggering Screen
Use this screen to configure port triggering. You can turn port triggering on or off and
configure new and existing port triggering rules.
Click
Basic
>
Port Triggering
. The following screen displays.
Figure 27:
The Basic: Port Triggering Screen
The following table describes the labels in this screen.
Table 18:
The Basic: Port Triggering Screen
All Port Triggering
Rules
Use this field to turn port triggering on or off.
Select
Enabled
to turn port triggering on.
Select
Disabled
to turn port triggering off.
Port Triggering Rules
Application Name
This displays the name you assigned to the rule when
you created it.
Trigger
This displays the range of outgoing ports. When the
CODA-4x8x detects activity (outgoing traffic) on these
ports from computers on the LAN, it automatically opens
the
Target
ports.
Target
This displays the range of triggered ports. These ports
are opened automatically when the CODA-4x8x detects
activity on the
Trigger
ports from computers on the
LAN.
Protocol
This displays the protocol of the port triggering rule
(
TCP
,
UDP
or
Both
).
