14
C07UE001-1804
1-3
Operation Notice
1-3-1
Run Alert Area
The robot is a machine operating at high speed, whose maximum revolution radius
depends on the fixture size installed on the end. Before you operate the robot, please
ensure there is no any obstacle within the motion range, and indeed perform the
calibration to avoid collision and damage. When the robot is operated, the operator
should pay attention to the motion range for damage.
1-3-2
Temperature Error
When the robot is operated, the heat source comes from the electronic parts in the
control panel. There are the cooling fans on two side of the panel. The operator should
note the cooling fans normally run to prevent shutdown from overheating.
1-3-3
Flammability Alert
If you wipe the robot with volatile detergent or volatile chemicals are used in the
process, please ensure the temperature and the fan condition at any time to avoid a fire.
