15
C07UE001-1804
1-3-4
Humidity Error
Electronic components in the robot and the control panel are made of metal materials,
which are more sensitive to the relative humidity of the operating environment.
Higher humidity will accelerate to oxidize the contacts of metal part and electronic
component, and loosen the assembly structure and cause poor contact; lower humidity
will easily generate static electricity and damage electronic components. It is
recommended the relative humidity in the ambient environment should be less than
50%.
1-3-5
High Voltage
1P 200~240VAC is supplied to the robot. Once electric leakage or touch by accident
takes place, it will cause serious injury or death. When you install the robot, you need
to check each connector is indeed connected, and ensure all circuits are not
excessively bent, even broken or damaged.
1-4
Emergency Stop
If you feel the robot failed during the operation, please immediately press the
EMERGENCY STOP button. When you press the EMERGENCY STOP button, the
arm will stop in the shortest distance by the controller and the motor brake.
Don’t press the EMERGENCY STOP button when the arm normally operates. If
you press EMERGENCY STOP button during the operation, it could hit the
peripherals and internal hardware to cause damage.
