HJM_PECS_ENG_Rev.0_02-10-2019
Made in Spain
14
/
24
POWER LEVEL INDICATOR
: This appears on the left-hand side of the screen and it
depends on the programmed temperature level. The higher the programmed
temperature is, the greater the number of bars shown on the icon. This is
instantaneous consumption visualization as, the higher the programmed temperature
is, the higher the energy consumption is.
B
LOCK FUNCTION
: It is possible to block the radiator to prevent children from using it
improperly or, for example, in a public space.
In order to block/unblock the buttons, press the “Mode”
button and keep in pressed
down for 3 seconds, until the icon appears (blocked) or disappears (unblocked).
CONSUMPTION METER FUNCTION:
This function allows us to read the radiator’s
consumption expressed in kWh. In order to do so, the power of the emitter must be
previously adjusted, following these steps:
1.
Unplug the device from the electricity supply.
2.
Simultaneously press buttons
and
.
3.
Without releasing the buttons, plug the device into the electricity supply for at
least 5 seconds until you can see the power adjustment function, as shown in this
image:
4.
Use the
and
buttons to select your radiator’s power in Watts.
5.
Confirm the selection with the
button.
This operation only needs to be done the first time and then it will stay saved; it is not
necessary to repeat it every time you wish to consult consumption.
Now you can read the consumption for various periods of time in the following way:
1.
Turn the radiator to off/stand-by mode.
