HL-Tech BT-1005, User Manual

BT-1005 BT V2.0 USB Adapter 

BT-1005 User’s Manual 

華朗科技股份有限公司

 HL-Tech Corporation 

HL-Tech Corporation   

5

5. Adding a COM port 

You can add an incoming port that receives a connection from a Bluetooth device, or you can add an outgoing port 
that makes a connection to a Bluetooth device. To connect to a Bluetooth device using a COM port, follow these 

steps:  

1. 

Use the port configuration options in Device Manager to set the COM port configuration. 
 

For the correct data rate and for other settings, see the documentation for the program that you want to 

use over the connection. 

2. 

Set the COM port in the program to the port number that is specified on the last page of the Add Bluetooth 

Device Wizard. 

 
This port number is also listed on the 

COM Ports

 tab in Bluetooth Devices. 

Bluetooth devices that use a COM port require special programs on your computer. These programs are typically 

included with the device. You can also obtain these programs from the device manufacturers. To set up your 
program to use a COM port, follow the instructions in the program documentation. 

6. Hardware 

The Hardware tab in Bluetooth Devices lists the Bluetooth devices that are installed on your computer. This is the 

same list that is shown in the Bluetooth Radios category in Device Manager. When you select a device in the list and 

then click Properties, you see the same device properties as you would see in Device Manager.