- 2 -
INTRODUCTION
Thank you for purchasing your new HLA Hydraulic Rotary Broom. Your Broom is designed primarily for road
construction cleanup, parking lot cleanup, etc. Other uses may be considered contrary to the intended use. This
product has been designed and manufactured to give you many years of dependable service. You or any other
person, who will be assembling, operating, maintaining or working with this product, are required to read and
completely understand the information and instructions contained in this manual. If anyone does not fully
understand every part of this manual, please obtain further assistance by contacting the dealer from which this
product was purchased or by contacting HLA at the telephone number or address listed on the previous page of
this manual. Keep this manual available for reference whenever this product is being handled or used. Provide this
manual to any new owners and/or operators.
This manual covers models: BR72, BR 84.
GENERAL INFORMATION
The purpose of this manual is to assist you in safely assembling, mounting, operating and maintaining your Broom.
Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and
dependable service. The illustrations and data used in this manual were current at the time of printing, but due to
possible engineering and/or production changes, this product may vary slightly in detail. HLA reserves the right to
redesign and/or change components as necessary without notification.
Throughout this manual, references may be made to:
Power Unit
The engine-driven machine to which this product must be attached.
Right, Left, Front,
Rear
Directions which are determined in relation to the operator of the equipment when seated in the
normal operating position.
IMPORTANT
Precautions that must be followed to prevent damage to equipment.
NOTICE
Precautions that must be followed to prevent substandard performance.
SERIAL NUMBER LOCATION
Always refer to the model and serial number when ordering parts or requesting information from your dealer. The
serial number plate location is shown on the diagram for your Broom model on page 6, item #1.
Serial Number: ___________________
