Device Charging
For the first time use,please fully charge the battery for around 2-3 hours with the USB
charger.
Turn on the device by Inserting Card
Please insert the SIM card in the right direction. You will see the indicator light
sparkles,then turn off.That means the SIM card inserted successfully.
After normal turn-on, the platform will upload position in 10 minutes and you can log on
the website for checking.
Configuration and Operation by SMS
1.To Set the Authorized Number
Command
:
CENTER,000000,phone number#
NOTE
:The letters or symbols should be English and the letters should be in capital.
Example
:CENTER,000000,123456789#
※
Using your mobile phone,send the above command to the phone number of the
device,it will reply: Center OK!
※
To delete this number,you can send :CENTER,000000,0# to the phone number of the
device.
2.GPRS Setting
In order to use the GPRS function,the user needs to setup the APN by sending SMS
command.
--what is APN? Access Point name(APN) is the name used to identify a general packet
radio service (GPRS) bearer service in the GSM mobile network. The APN defines the
type of service that is provided in the packet data connection.
※
Make sure that the SIM card in the tracker supports the GPRS function.
※
The APN can be acquired from your local GSM operators.
Command
:
APN,APN information,user name,password#
Note
:Some APN without user name and password,so please leave it blank.
For example
:
APN,internet,123,456#
(with the user name and password)
APN,internet#
(without the user name and password)
