7.Listen-in (Voice Monitoring)
Command
:
JT#
※
after sending the command,it will reply:JT OK!
※
The tracker will call the center number automatically after the SMS reply,then please
answer the call to hear what is happening around the tracker.
8.Checking Settings
Command
:
ST#
※
The device will reply:
IMEI
：
888xxxxxxxxx888
MC
：
1(Alarm mode )
VA
：
0 (Vibration alarm on/ff)
OS: 0
（
Over speed alarm on/off
）
LA
：
0
（
Light perception alarm on/off
）
HBT
：
10 (Heartbeat packet time)
LANG
：
1
（
language
）
GMT
：
E8 (time zone)
Command
:
#TCP#
※
The device will reply : IMEI NO./WEBSITE:PORT NO./APN##/NETWORK
STATUS/SIGNAL#POWER
Example
:353506810007721/www.b.gps903.net:7700/cmnet##/SOC4/165:30#100
9.Reboot device
Command
:
RESET#
※
The device will restart itself without changing any settings.
10.Initialization
Command
:
RFS#
※
This is to make all settings back to the factory default,except the IP.
※
Only the center number has the right to operate.
※
please caution to use.
11.Working Modes
Command
:
WKMD,2#
(super-long standby mode)
WKMD,1#
(power-saving mode)
WKMD,0#
(safe mode)
※
the default mode is safe mode.
※
Super-long standby mode
:The platform only work when you send a SMS command
to get the location,this is the most power-saving.
