9
Single-Lane Operation
(one base station for one speaker post)
Hands-Free (HF) Mode
With the power off, press and hold the volume-up
▲
and B buttons
while you press and release the PWR button to turn the power on in
the HF mode. The COMMUNICATOR
®
will remember this setting.
As a customer enters the drive-thru lane, you will hear an alert
tone (single beep) in your headset, and you will be able to hear
the customer at the speaker post or menu board.
Use the volume-up
▲
and down
▼
buttons to adjust the
customer’s voice level in your headset if necessary.
Touch and release the A1 or A2 button to speak and listen to the
customer.
Touch and release the A1, A2 or B button to end communication
with the customer.
Touch and release the A1 or A2 button if you want to speak to the
customer again.
If a customer drives away from the speaker post or menu board,
the Communicator will stop transmitting.
Auto Hands-Free (AHF) Mode
With the power off, press and hold the volume-up
▲
and A1
buttons while you press and release the PWR button to turn the
power on in the AHF mode.
As a customer enters the drive-thru lane, you will hear an alert
tone (single beep) in your headset, and you will be able to hear
the customer at the speaker post or menu board.
Use the volume-up
▲
and down
▼
buttons to adjust the
customer’s voice level in your headset if necessary.
Speak and listen to the customer without pressing any buttons.
Touch and release the A1, A2 or B button to end communication
with the customer.
Touch and release the A1 or A2 button if you want to speak to the
customer again.
If a customer drives away from the speaker post or menu board,
the Communicator will stop transmitting.
Push-To-Talk (PTT) Mode
With the power off, press and hold the volume-down
▼
and B
buttons while you press and release the PWR button to turn the
power on in the PTT mode. The Communicator will remember
this setting.
As a customer enters the drive-thru lane, you will hear an alert
tone (single beep) in your headset, and you will be able to hear
the customer at the speaker post or menu board.
Use the volume-up
▲
and down
▼
buttons to adjust the
customer’s voice level in your headset if necessary.
Touch and hold the A1 or A2 button to speak to the customer.
Release when finished.
NOTE:
Only one
Communicator
operator at a time
can use the auto
hands-free feature.
If a Communicator
is turned off while
in the AHF mode, it
will automatically
be reset for its
previous operating
mode
