“2580” followed by “ENTER” If the password is accepted, the display will show “use *
to scroll to menu options”
1) Set Current Time
At the “Set Current Time” menu, set the hour then press “ENTER” key.
Set the minutes and press “ENTER” key.
Use the “#” key to select AM or PM
After the time is set, press the “ENTER”, and “Time Saved” will show on
display. If the time is not correct, press the “CANCEL” key twice to exit the
system programming menu.
2) Set Sleep Shutdown Time (Factory Default: OFF)
This system has an “ALL SLEEP” function that turns off all battery pagers at once
automatically.
To turn this feature off
Press “#” key to turn the sleep shutdown “OFF”
Press “ENTER” to go back to the main menu.
To change the shutdown time
Press “#” key to turn the sleep shutdown “ON”
Set the hour then press “ENTER” key.
Set the minutes and press “ENTER” key.
Use “#” key to select AM or PM.
After the time is set, press the “ENTER”, and “Time Saved” will show on
display. If the time is not correct, press the “CANCEL” key twice to exit the
system programming menu,
3) Range Test (Factory Default: OFF)
With this feature, you can determine what distance your transmitter will cover.