StaffCall IQ Pager
Page
3
of
4
800-321-6221
Step 7
Before replacing the circuit board in the pager, make sure that the side button is still in the side of the pager. If not,
place it back in the proper location. Be sure to also confirm that the contacts are still connected to the bottom of the
circuit board. The pins from the contact will need to be inserted into the connector on the circuit board.
Step 8
After the button is correctly installed, replace the circuit board making sure that the contacts on the bottom of the pager
are lined up. Make sure the motor is lined up with the proper slot. Once the circuit board is replaced, make sure to clean
the displays.
Motor
Contacts
Display
Clean using a lint free cloth
