User guide for Shower/Commode chair M2 Mini El-Tip.
Intented for use a bathing, showering and toilet visit.
(3/5)
Adjusting of push handles
Take out the clips and move the handle to the
wished position. Put the clips back in.
NB!
There are holes so the handles can be
angled backwards or to the sides so the chair
is easier to maneuver.
Mounting of calf support
The calf support is fastened with Velcro tape on the
backside. The depth and the calf support is adjusted
by fastening the Velcro tape further in or further out.
Care: Washable at max. 80 degrees
Mounting of side supports
The side supports are put in the square tube on
the chair frame. Height/Depth/Width is adjusted by
loosening the finger screw and then holding the
side support in the wished position and then
tightening the finger screw again. If wished you
can place the foam pillow horizontal
Adjusting the headrest
(Art. No. 310221)
The height of the headrest is adjusted by loosening
the finger screw and tightening it again when the
height is right.
Adjusting H+D headrest
(Art. No. 310222)
The height and depth of the headrest is adjusted
by loosening the two finger screws and then
tightening them again once they are in the right
position.
Mounting of hipstrap
The two pars are mounted on the back rest tubes. The
hipstrap is closed and opened with Velcro.
Continued on page 4
