8 (10)
4
Configuration
4.1
Anybus Configuration Manager
Fig. 4
Anybus Configuration Manager
The interface can be configured over the USB port using Anybus Configuration Manager, which
can be downloaded from
The following settings are available when the POWERLINK interface is selected in Anybus
Configuration Manager:
Input PDO Size (bytes)
Amount of
cyclical
I/O data to exchange on POWERLINK
Output PDO Size (bytes)
Input SDO Size (bytes)
Amount of
acyclical
I/O data to exchange on POWERLINK
Output SDO Size (bytes)
Offline option
Action if the POWERLINK network goes offline
Clear
= reset the data from the network to zero (0).
Freeze
= keep the current value.
Control word/Status word
Enables/disables the control word and status word on POWERLINK.
Node ID (1–239)
The Node ID of the POWERLINK interface.
Valid values = 1 to 239, 240 is reserved for the managing node.
For more information, see the built-in help in Anybus Configuration Manager.
POWERLINK Slave Anybus
®
X-gateway
™
Network Interface User Manual
SCM-1202-091 1.1 en-US
