Safety, Environmental & Regulatory Information
5 (18)
3
Safety, Environmental & Regulatory Information
3.1
Scope
The present heading addresses Safety, Environmental & Regulatory Information about the FLX
3101 – single Ethernet port extension card.
This extension card is belonging to the same compliance frame than the base units. In the
present case of a telecommunication extension card, additional directives, standards and
instructions apply.
3.2
ESD Damage Prevention
Always use ESD precautions when handling extension cards and / or opened base unit as
they contain parts and assemblies susceptible to be damaged by electrostatic discharge
(ESD).
The extension card described in this document is a module exposing both sides of an electronic
printed circuit board. Therefore, it is packed in an antistatic ESD bag. In order to avoid ESD
damage, the product must be handled with the necessary precaution including:
•
Grounded ESD protective work surface
•
Personnel grounding
3.3
Applicable Directives, Standards and Compliances
TheFLX 3101 inserted in a base unit belongs to class A Information Technology Equipment (ITE).
In a domestic environment, this product may cause radio interference in which case the user
may be required to take appropriate measures.
3.3.1
Applicable European Directives
The FLX 3101 is in conformity with the following EC directives:
•
RoHS Directive 2011/65/EU
•
RE Directive 2014/53/EU
3.3.2
Applicable Safety Standards
The FLX 3101 is in conformity with the following safety standards:
•
IEC / EN 60950-1
•
UL 60950-1
•
CSA-C22.2 No 60950-1-07
•
EN/IEC 62368-1
•
UL 62368-1
•
CAN 62368-1
Single Ethernet Ext. Card FLX3101 Installation Guide
IG-0017-00 1.5 en-US
