3.
Select
Manual, Interval, Target Distance, Target Calories, Target HR, Target Time
program:
3.1
Manual mode:
①
In Standby mode, press START to start workout quickly, the buzzer sound 1 second. TOTAL TIME/ TIME/
DISTANCE/ CALORIES/ WATTS/ SPEED/ RPM start to count up (Figure 17).
②
No signal input for 30s, buzzer sounds 1 short beep and enter to Wake-up mode. Press any to wake up the
console.
③
Press START key once to pause training, Buzzer will sound for 0.5s in every 30s. All values are
displaying on LCD and flashing in every 4s. If continue to stop training for 5 minutes, buzzer sounds 2s
and enter to Wake-up mode. Press START to resume workout.
④
Press STOP key, TIME will display total workout time; DISTANCE will display total workout distance;
CALORIES will display total consumption during workout; WATT, SPEED and RPM will switch to
display AVG. & MAX. (Figure 18~19) each 5s.
⑤
Press any PROGRAM key then perform the program accordingly.
3.2 Interval 20/10 mode:
①
Press INIERVAL key to select INTERVAL20/10, press ENTER then
INTERVAL20/10
will light up,
alongwith a long sound for 1s.
②
Cycle time counts down from 3 to 0 then console start, meanwhile buzzer beeps once per second and
READY
flashes once per second, counting displays ‘00/08’(Figure 20).
③
Cycle time counts down from 20 to 0 and
WORK
flashes once per second . Meantime windows displays
rotation animation and
count down from 4 minutes. Then TOTAL TIME, DISTANCE, CALORIES, WATTS, SPEED & RPM start
calculating, counting displays ‘01/08’(Figure 21).
④
Cycle time counts down from 10 to 0 and
REST
flashes once per second along with 10 beeps(Figure 22),
meanwhile
READY
will flash in last 3s (Figure 23).
⑤
The above
③
&
④
continuie cycle counting and add 1 per each cycle,until displays 08/08
WORK
, then go
to End page.
⑥
Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s in every 30s. All values are
displaying on LCD and flashing in every 4s. If continue to stop training for 5 minutes, buzzer sounds 2s
and enter to Wake-up mode. Press START to resume workout.
⑦
Press STOP or end up training, buzzer beeps 1s then displays TOTAL TIME, DISTANCE,CALORIES
for 30s, and WATT, SPEED & RPM will switch to display AVG. & MAX. (Figure 18~19) each 5s.
⑧
Press any PROGRAM key then perform the program accordingly.
Figure 16
Figure 18
Figure 19
Figure 17
Summary of Contents for MP8880
