•
“F07” to “F12” means Grass model
•
“F13” to “F18” means Plastic runway
•
“F19” to “F24” means Highway
The operation method is:
When power on or start treadmill, press SOFT/HARD +,the CALORIES show “F01”,its most soft
no
w,then press “+” again,it change to “F02”,and so on to “F24” the most hard; same way,it can
change from “F24” to “F01”,customer could choose which one suitable.
3.
START/STOP
- Power on treadmill, press this key to start or stop treadmill.
4.
SPEED
-
‘+’
this sign to be increase the speed. The adjustment range is +0.1. When it is held for more
than 0.5 seconds, it will automatically increase by +0.5.
‘
-
’ this sign to be decrease the speed.
its
adjustment range is -0.1, and it will automatically continue to decrease -0.5 when it is held for more
than 0.5 seconds.
5 .
DISTANCE MODE
- In standby, press MODE, the DISTANCE window displays Pb. The system speed
will change automatically in each interval according to program settings.
The speed can be changed by
pressing the buttons “+/
-
“ +, but when the program enters the next
segment, the speed of the segment will be resumed.
After finishing the workout device will make Bii sound and show END on the display. Device will stop
smoothly and turn into standby mode.
Quick start (manual mode)
1.Turn on the power switch and check if the safety key is in correct position under the panel.
2. Press the “Start/Stop” button, the system will enter the 3 second countdown, the buzzer will
sound, and the SPEED window will display the countdown. After the 3 seconds countdown, the
treadmill will start running at 0.8 km/h.
3.After starting, you can use the "Speed +", "Speed -" button to adjust the speed of the treadmill.
Summary of Contents for BE4554
Page 1: ...BE4554...
Page 49: ......
