17 (26)
3.5
Network Settings – WAN
Fig. 26
WAN settings
The
WAN
interface should be enabled when connecting to Netbiter Argos via Ethernet.
When DHCP is enabled the unit will automatically receive the settings for IP address, subnet
mask, default gateway, and DNS. Contact your network administrator if in doubt.
3.5.1
Proxy Settings
Fig. 27
Proxy settings
If you are connecting to the Internet via a proxy, check
Enable Proxy settings
, select the
Proxy protocol
and fill in the IP address and port number for the proxy server. If the proxy re-
quires authentication, check
Use Proxy authentication
and fill in the username and password.
The proxy password must not contain blank spaces.
Click on
Save settings
when finished.
For information about supported proxy types, see
Netbiter EC300 Series User Manual
SCM-1202-012
2.2
