Step 5
1)
Set 2 pcs of Φ17.5*Φ25 washer(7) at the right/left end of Handle Mandrel(F).
2) Set the Left upper handle parts(G) and Right upper handle parts(H) at the left/right end of handle Mandrel(F). Using 2 pcs
of Φ8.5*Φ25 washer(8) and 2 pcs of M8*1.0*20mm bolt(9) to lock them by 2 pcs of Wrench(4) (See picture 7)
Step 6
1) Get the Left Pedal Tube Parts L(I). Attach the upper end of Left Pedal Tube Parts L (I) with the Left Upper Handlebar
Parts(G),using 2 pcs of M8*40mm screw(10),2 pcs of Φ8*19 washer(2) and 2 pcs of M8 nut(3) to connect tchem (See
picture 8), locked them by L wrench 5*5mm(6) and Spanner(11).(See picture 9).
2) Removing screw, nut and washer which preset on Left Pedel Tube Parts L (I), then connect the Left Pedel Tube Parts L(I)
with the crank legs by using the screw/nut/washer we got from last step, then lock them by Spanner(13) and Wrench
6*6mm(12).(See picture 10)
3) Assemble Right Pedal Tube Parts(J) as above steps!
Picture 7
Handle Mandrel
Handle Mandrel
Washer
(7)
Picture 9
Picture 8
Picture 10
