![background image](http://html1.mh-extra.com/html/hms/inbacmbm1000000/inbacmbm1000000_user-manual_2141842032.webp)
BACnet Server
– Modbus Client
User Manual r1.10 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
32 / 41
7
Status LEDs and push buttons
LED
Colour
Indication
Run
Off
No power
Green
Device powered and working.
Error
Off
No error
Red
Error
Port A (Tx/Rx)
– Modbus RTU
Off
There is no activity on this port.
Tx - Blinking green
Every data packet sent to the network it
blinks
Rx
– Blinking yellow
Every data packet received from a slave
device it blinks
Port B (Tx/Rx)
– Modbus RTU
(Using BACnet/IP protocol)
Off
There is no activity on this port.
Tx - Blinking green
Every data packet sent to the network it
blinks
Rx
– Blinking yellow
Every data packet received from a slave
device it blinks
Port B (Tx/Rx)
– BACnet
(Using BACnet/MSTP protocol)
Off
There is no activity on this port.
Tx - Blinking green
Every data packet sent to the network it
blinks
Rx
– Blinking yellow
Every data packet received from a slave
device it blinks
Button A
– Modbus RTU
Off / Red
It
doen’t have any functionality
Button B
– Modbus RTU
(Using BACnet/IP protocol)
Off / Red
It doen’t have any functionality
Button B
– BACnet
(Using BACnet/MSTP protocol)
Off / Red
On when link is detected:
- BACnetIP: ethernet is up & running,
the IBOX got an IP
- BACnetMSTP: token passing is
detected
Push button
Functionality
Button A
– Modbus RTU
It doesn’t have any functionality to start with but It can be configured from
Intesis MAPS software under configuration/USB host
Button B
– Modbus RTU
(Using BACnet/IP protocol)
It doesn’t have any functionality to start with but It can be configured from
Intesis MAPS software under configuration/USB host
Button B
– BACnet
(Using BACnet/MSTP protocol)
Sends to Broadcast I-Am message